HELP with corruption on $mft - Mailenable cant send email

Discussion regarding the Standard version.
Post Reply
adammc
Posts: 4
Joined: Wed Nov 01, 2006 1:47 pm

HELP with corruption on $mft - Mailenable cant send email

Post by adammc »

Hi we are having a major problem with email outbound only via any client webmail or outlook

Messages *appear* to be sent but they are just going into hyperspace - we had previously installed SpamAssassin but it hung the server and after rebooting - this problem manifested itself.

We have tried TELNET and it doesnt send, however HELM our hosting control panel IS sending via SMTP OK .. which is very odd.

Any help/ideas on where to look?

Trace: Tracing message with Message ID [413E7FC945EF478492F1F3BC674D65.MAI] from the SMTP Inbound Queue

Status: Message ID [413E7FC945EF478492F1F3BC674D65.MAI] was routed by the MTA from the SMTP Inbound Queue to 1 destination queue(s)

11/01/06 11:35:46 Queue Route: Message ID [413E7FC945EF478492F1F3BC674D65.MAI] was routed by the MTA from the SMTP Inbound Queue to the SMTP Connector (SMTP) Outbound Queue with a Message ID of [579698B4ABD454B97B26491AD79.MAI]

ezwpp
Posts: 23
Joined: Thu Oct 19, 2006 9:58 pm

Post by ezwpp »

This could be a host of problems, lets start by telling us what Vs. of ME your running (1.96 is the latest). Are you running Authenticated user? Does your Host use a SmartHost? I have to run to work but someone will help.

adammc
Posts: 4
Joined: Wed Nov 01, 2006 1:47 pm

Post by adammc »

ME Professional v1
Yes running as authenticated user via SMTP
Not using smarthosts at all
DNS is resolving fine from the box

adammc
Posts: 4
Joined: Wed Nov 01, 2006 1:47 pm

Post by adammc »

Problem sorted now - had to reformat the D drive to resolve.

Post Reply