Stopping Backscatter

For any other discussion relating to MailEnable.
Post Reply
ahicks
Posts: 1
Joined: Wed Jun 05, 2019 2:01 pm

Stopping Backscatter

Post by ahicks »

Can anyone direct me to information on how to stop Backscatter. It is becoming a major frustration point. Using ME Enterprise v10.24 on Windows server. Any help on this would be greatly appreciated.

cmiller@atcomm.com
Posts: 23
Joined: Wed Aug 27, 2008 3:33 pm

Re: Stopping Backscatter

Post by cmiller@atcomm.com »

I stopped sending NDR's under failure notifications in the Delivery Tab of the SMTP properties. I've been getting nabbed on the Backscatterer list myself. It's annoying. I allow NDR generation to authenticated users only and have a copy sent to me.

EmEl
Posts: 1
Joined: Wed Jul 24, 2019 5:15 pm
Location: https://cookingtimejournal.com/

Re: Stopping Backscatter

Post by EmEl »

You could try to check the box named “Authenticated senders must use valid sender address” and configure the postoffice connector to not send NDRs

infrared
Posts: 2
Joined: Thu Feb 06, 2020 3:55 pm
Location: https://infraredovenreviews.com/nuwave-oven-reviews/

Re: Stopping Backscatter

Post by infrared »

Facing same issue of Backscatter , Tried many things till now but didn't get good results, its fed up point for me :(

Post Reply