Hello,
Environment:
-Windows 2012R2 Server on a Hyper-V virual machine
-4 virtual processors / 16 GBytes Memory
-Windows 2012R2 on a actual release
- Updated to ME 10.38
- After a new start everything seems to working well
- After 5 to 10 min we had no contact to the activesync services
- Reboot, the same as above
- Checked with https://testconnectivity.microsoft.com/tests/O365Eas/input works perfect for 5 to 10 min
- Stop MailEnableEASPool, start MailEnableEASPool: works perfect for 5 to 10 min
- Windows Events shows: System Warning: WAS 5013 Timeout: for MailEnableEASPool
- and: System Warning: WAS 5138 MailEnableEASPool could not close listen channel for protocol "http" Error#: B4050780
- Each time when stop and start MailEnableEASPool the warning repeats
-In IIS application pool going to MailEnableEASPool going to Reuse, set the intervall to 5 min, periodic, necessary, faulty ISAPI
- now the application pool MailEnableEASPool starts every 5 min.
But this cannot be the solution for this Problem!
Thank you very much for any input!
MailEnableEASPool stops after 5 min working
-
- Posts: 8
- Joined: Mon Oct 07, 2013 2:09 am
Re: MailEnableEASPool stops after 5 min working
I had timeout issues and activesync partially working on and off after installing 10.38. I couldn't figure it out so I rolled back to 10.37 and activesync began to work again.
-
- Site Admin
- Posts: 9738
- Joined: Mon Mar 22, 2004 4:44 am
- Location: Melbourne, Victoria, Australia
Re: MailEnableEASPool stops after 5 min working
Hi,
Please see: https://mailenable.com/forum/viewtopic.php?f=14&t=44235
Please see: https://mailenable.com/forum/viewtopic.php?f=14&t=44235
Regards,
Ian Margarone
MailEnable Support
Ian Margarone
MailEnable Support