How to Enable Smtp TLS?

Raise/discuss any potential issues with MailEnable for consideration in project issue register.
Post Reply
kenny123
Posts: 4
Joined: Mon Apr 05, 2021 9:50 am

How to Enable Smtp TLS?

Post by kenny123 »

recently, I had removed the mailbox into my MailEnable server. but it had some problem, the SMTP tls function dose not work, it made the mailbox in domain: 1stip.com, can not send email to each other . How can I open the TLS in SMTP?
Attachments
20210405182431.jpg
20210405182431.jpg (15.15 KiB) Viewed 16388 times
20210405181649.jpg
20210405181649.jpg (55.06 KiB) Viewed 16388 times

MailEnable-Ian
Site Admin
Posts: 9738
Joined: Mon Mar 22, 2004 4:44 am
Location: Melbourne, Victoria, Australia

Re: How to Enable Smtp TLS?

Post by MailEnable-Ian »

Hi,

Please see: https://www.mailenable.com/documentation/10.0/Enterprise/SMTP_props_-_Inbound.html
Regards,

Ian Margarone
MailEnable Support

kenny123
Posts: 4
Joined: Mon Apr 05, 2021 9:50 am

Re: How to Enable Smtp TLS?

Post by kenny123 »

I already seen this page https://www.mailenable.com/documentation/10.0/Enterprise/SMTP_props_-_Inbound.html
and also setting. but when I use telnet check, it dosen't show the starttls 250.
Attachments
20210406113504.png
20210406113504.png (6.98 KiB) Viewed 16383 times
20210406113035.png
20210406113035.png (74.19 KiB) Viewed 16383 times

MailEnable-Ian
Site Admin
Posts: 9738
Joined: Mon Mar 22, 2004 4:44 am
Location: Melbourne, Victoria, Australia

Re: How to Enable Smtp TLS?

Post by MailEnable-Ian »

Hi,

Did you restart the SMTP connector after enabling the option? Also try and telnet locally on the server to "localhost" on port 25 and then check to see if the "StartTLS" extension is reported. This is a test to ensure that a proxy or gateway is not causing problems.
Regards,

Ian Margarone
MailEnable Support

kenny123
Posts: 4
Joined: Mon Apr 05, 2021 9:50 am

Re: How to Enable Smtp TLS?

Post by kenny123 »

It works, thx.

MailEnable-Ian
Site Admin
Posts: 9738
Joined: Mon Mar 22, 2004 4:44 am
Location: Melbourne, Victoria, Australia

Re: How to Enable Smtp TLS?

Post by MailEnable-Ian »

Hi,

What was was the solution? A restart?
Regards,

Ian Margarone
MailEnable Support

Post Reply